Hot-dip galvanizing line bath chemistry, level and cleanliness with one analyzer
The Galvalibs 2.0 brings bath chemistry analysis from the laboratory to the line
Talk to an expertAll-in-one
analyzer
Probe
This compact all-inclusive analyzer is ready to operate in harsh environments. The Galvalibs 2.0 has been designed with the operator in mind. It’s lightweight and easy to connect and disconnect for no-hassle manipulation.
- DuraBeam™ sealed optics
- Easy to mount and connect, can be manipulated by a single operator
- Compressed air cooling system
- Protective silicone/fibreglass thermal blanket also acts as a splash guard
- Easy replaceable sacrificial output window.
Lance
Sturdy hollow ceramic cylinder for inserting probing gas bubbles deep into the molten metal. One lance is used for multiple baths and many years.
- Chemically inert to molten zinc and molten aluminum
- Robust dense ceramic cylinder
- Easily sustain high-temperature bath
- Easy “twist-lock” attachment for quick-change or maintenance.
Motorized positioning device
Easily insert and extract the probe from the molten bath. The device automatically positions the probe near the surface, before insertion to allow moisture removal and thermal balancing of the lance. The motorized positioning device makes operation easy.
- Industrial-grade motorized positioning device to slowly insert analyzer in bath
- Three positions: in bath, idle above bath, in maintenance
- Equipped with safety interlocks
- Accurate in-bath position with precision better than 1 mm
- Automated bath insertion sequence, ensuring proper lance drying and surface skimming
- Very low maintenance
- Customizable travel and extension over bath.
Manual positioning device
Easily insert and extract the probe from the molten bath. Low-cost alternative to the motorized positioning device.
- Industrial-grade manual positioning device to slowly insert analyzer in bath
- Three positions: in bath, idle above bath, in maintenance
- Equipped with safety interlocks
- Accurate in-bath position with precision better than 1 mm
- Very low maintenance
- Customizable travel and extension over bath.
Control unit
Robust industrial-grade control unit for easy access to data and status of the analyzer.
- Small footprint
- Can be located up to 40 metres (120 ft.) from analyzer and bath
- PLC-based automation and controls
- Passively cooled
- Sealed enclosure to industrial environment (IP 54).
Gas supply management
Keep your data unbiased and your lance clean with Tecnar’s specifically designed gas supply system. The flexible stainless steel line prevents impurities from reaching the measurement environment.
- Double-stage, high-purity regulator
- Leak-proof stainless steel flexible delivery tube
- Dual pigtail inlets for uninterrupted gas supply when changing cylinder
- Automated flow control to minimize gas consumption, especially when analyzer is idle
- Bottle pressure monitoring to know when to replace cylinder.
Plant interface
Get your data anywhere at any time with a Galvalibs 2.0 interface with your plant network.
- Fully automated data transfer to plant network or level 2 for feedback loop
- Direct access to PLC block data readout
- TCP/IP continuous streaming of all data recorded by analyzer
- Up to 10 analog outputs available – standard 2 outputs
- Tecnar UI
- Lifetime operation license and upgrade.
GCU
The Galvalibs 2,0 Calibration Unit (GCU) gives operators the ultimate autonomy to perform routine calibrations without a laboratory.
- Fully automated six (6) slot sample carousel
- Light-tight interlock enclosure for laser safety
- Quick “twist-lock” connector to Galvalibs 2.0 probe
- Chemistry measurement with RSD better than 2%
- Compatible with Ga-Gi, Zn-Al-Mg and Al-Si processes.
Technical specifications - Galvalibs 2.0
Bath Chemistry
Element range
Effective aluminum: 0.020 wt% to 60 wt%
Dissolved iron: 0.008 wt% to 3.0 wt%
Soluble magnesium: 0.001 wt% to 6.0 wt%
Soluble silicon: 0.001 wt% to 15.0 wt%
Chemistry accuracy
Residual standard deviation (RSD): 0.5%
Bath level
Bath-level accuracy
Residual standard deviation (RSD): 0.4 mm
Residual standard deviation (RSD): 0.16 in.
GCU sample chemistry
Gi-Ga element range
Al: 0.100 wt% to 0.700 wt%
Fe: 0.008 wt% to 0.032 wt%
Zn-Al-Mg element range
Al: 1.0 wt% to 12.0 wt%
Fe: 0.010 wt% to 0.050 wt%
Mg: 1.0 wt% to 6.0 wt%
Al-Si element range
Si: 8.0% to 12.0%
Fe: 1.0% to 3.0%
Chemistry accuracy
Residual standard deviation (RSD): 2%
Utilities
Electrical supply
200 - 240 VAC @ 50 or 60 Hz, -5%/+10%, 4 to 7 Amp
Compressed air supply
Instrument compressed air (ANSI/ISA-7.0.01), 550 kPa, 42.5 to 68 m³/hr
Instrument compressed air (ANSI/ISA-7.0.01), 80 psi, 25 to 40 cfm
Gas supply
Argon quality: minimum gas purity 4.8 (99.998%)
Average consumption: 0.75 LPM
Dimensions and weight
Probe (without lance)
499 mm x 338 mm x 141 mm
21 kg
20 in. x 13 in. x 5.6 in.
45 lbs.
Lance
111 mm x 83 mm x 821 mm
4 kg
4.4 in. x 3.3 in. x 32.3 in.
9 lbs.
Motorized positioning device
1795 mm x 444 mm x 852 mm
110 kg
Standard extension - 450 mm
Standard travel range - 900 mm
70.7 in. x 17.5 in. x 33.5 in.
243 lbs.
Standard extension - 17.7 in.
Standard travel range - 35.4 in.
Manual positioning device
1769 mm x 512 mm x 852 mm
100 kg
Standard extension - 450 mm
Standard travel range - 900 mm
69.6 in. x 20.2 in. x “33.5 in.
220 lbs.
Standard extension - 17.7 in.
Standard travel range - 35.4 in.
Control unit
884 mm x 818 mm x 365 mm
100 kg
NEMA 3/12 Enclosure
34.8 in. x 32.2 in. x 14.4 in.
220 lbs.
NEMA 3/12 Enclosure
Probe to control unit bundle
20 m long
3 m long zinc splash-resistant cover at the probe
standard travel range - 900 mm
65 ft. long
10 ft. long zinc splash-resistant cover at the probe standard travel range - 35.4 in.
Gas management
Ultra-high-purity grade components
Inlet pressure up to 275 bar
100% stainless steel flexible line
30 m long
Pressure tested for leak-free operation
Ultra-high-purity grade components
Inlet pressure up to 3000 psi
100% stainless steel flexible line
100 ft. long
Pressure tested for leak-free operation
GGU
407 mm x 234 mm x 238 mm
7.1 kg
16 in. x 9.2 in. x 9. in.
15.5 lbs.
Interested in getting into real-time bath composition, dross and level control?
Leave your details so our experts can contact you.
Our team will answer all your questions and suggest the best solution for your needs.
